|
Line Shaft Spools & C Clips |
| Regular Spools float on a line shaft (line shaft)
and function as clutches that will slip when boxes jam or accumulate,
thus preventing
belts from abrading. They also provide a safer working environment,
allowing rollers to stop if hair or hands get caught in rollers.
Designed
for 1” and 1-7/16” shafts. Bores are approximately 0.012”
larger than the shafts. Many different sizes and colors: |
|
| Speed-up spools increase
roller speed by 44%. |
| Keyed spools will
not slip, so use only in sections where there will be no accumulation.
Designed for curves, inclines, or where greater drive is needed. |
| Split spools can be
installed without disassembling the shaft. |
| C-Clips clamp
on shaft and keep spools in place.
For the best in line shaft spools and lineshaft C-clips insist
on Urethane Belt. |
