YOU ARE HERE: Conveyors | Low Profile Conveyors
|
 |
|
- Precision indexing
tolerance to register a part to within
+/- .015" without sensors.
- High speeds up
to 2000 fpm with ramp up/down capacity.
- Custom molded
cleats to integrate perfectly with your part or application.
- Cleats are high
frequency welded to the belt.
- Positive, non-slip
timing pulleys.
- Self-aligning drive
bearings with seals.
- Bearings can be
lubricated rapidly, without drive removal.
- Stepper motors
and Servo drives are PLC programmable.
- Optional self-tracking
V-guide is thermally welded to the carcass of the belt.
- Nylon coated belt
carcass to reduce friction and minimize noise.
- Ability to run
multiple bands of belting on one conveyor.
- Timing belts are
steel or Kevlar reinforced to offer high load carrying capacities, reduce
stretch and allow for precision cleat or profile placement.
- Low profile conveyor—only
3" high.
- Less than 5-minute
belt change without removal of drive package or guide rails.
- Widths up to 18"
and lengths up to 24' (Special widths and lengths available).
- Heavy duty load
carrying capacities.*
- High impact resistant
single piece formed powder coated
10 gauge steel frame.
- Wide variety of
application specific belting.
- Wide variety of
Sides, Guides, Mounts, Stands, Drive Packages and Controls.
|
|
|
|
|
|
