Knife Edge
|
Flomaster's innovative Knife-EdgeŽ Belt Power Turns use an innovative design concept to allow the ultimate transfer of small, lightweight products around curves from 30 to 180 degrees.
A fixed position end roll, 5/8" (15.9mm) diameter, allows reliable transfer and exact alignment of a wide variety of items at speeds up to 100fpm (.5 meters/sec.). These units can handle load capacities up to 15 lbs./ft. (22.3kg/meter).
Designed specifically to eliminate expensive accessories normally used to effect transfers, the Knife-Edge Belt Power Turn carries Flomaster's reputation for dependability and reliability into new applications.
All Knife-Edge Belt Power Turns have the following features:
- Large range of arcs
- Small fixed position end rolls, 5/8" (15.9mm) diameter
- Positive chain driven belt - no slippage from contaminants on the belt
- All steel construction
- FDA acceptable food grade belting is standard; static conductive belting is available
- Produced by the world's largest supplier of belt power turns
|
|
|
 |
|
