TREAD ROLLERS: 2-1/2" dia. x 11 ga. steel, model 251S.
CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60
roller chain.
CENTER DRIVE: Drive either side
mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS: 4" or 6" ONLY.
BED: 7" x 1-1/2" x 7 ga. and 5" x
1-1/2" x 7 ga. formed steel channel frame. Bed sections bolted together with butt couplings and floor supports.
ACCUMULATION ZONE: 5'-0" zone lengths, zone singulation operation, photo electric sensor controlled zones.
SPEED: 35 FPM, constant.
|
|
CHAIN GUARD: Chains are completely enclosed along entire length of conveyor.
FLOOR SUPPORTS: For underside drive, SH-4CDA adjustable 19" to 22" TOR; for side mounted drive, SH-2CDA adjustable 13" to 16" TOR. Supports provided on 5' centers and should be lagged to floor.
BEARINGS: Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CAPACITY: 1000 lbs./ft. up to a
maximum of 4000 lb. pallet.
ELECTRICAL CONTROLS: Optional |
