1.9" dia. x 16 ga. steel, model 196S.
DRIVE WHEEL ASSEMBLY:
Drive chain powers drive wheel assembly which
provides drive pressure to upper tread rollers.
#40 roller chain. UHMW chain guides support drive strands and return chain strands.
Completely enclosed along the entire length of conveyor.
1-7/16" dia. located at discharge end of unit.
Manual screw type adjustment is located at infeed end.
Allows one-direction unit operation.
5" x 1-1/2" x 10 ga. formed
BEARINGS: Precision heavy duty,
lubricated ball bearing units with cast
35" to 41-1/2" TOR. Supports should be lagged to floor.
60 FPM, constant.
operation; 3" RC = 2'-0" long zones; 4-1/2" RC = 3'-0" long zones. 1'-0"
of live roller at each end of conveyor over end plates remains "live" during operation. Zones are pneumatically
actuated using photo electric sensors.
Maximum air line pressure should not exceed 10 PSI.
100 lbs. per foot distributed live load. 500 lbs. effective chain pull with spring loaded chain
1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.