TREAD ROLLERS:
1.9" dia. x 12 ga., model 192S.
CHAIN DRIVE:
Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.
CHAIN GUARD:
All chains are completely enclosed along the entire length of conveyor.
CENTER DRIVE:
Drive either side
mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS:
4" or 6" RC ONLY.
SPEED:
35 FPM, constant.
ACCUMULATION ZONE:
5'-0" zone lengths, zone singulation operation, photo electric sensor controlled zones.
|
|
BED: 6-1/2" x 1-1/2" x 10 ga. and
4-1/2" x 1-1/2" x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.
FLOOR SUPPORTS: For underside drive, SM-3CDA adjustable 18" to 21"
TOR; for side mounted drive, SM-1CDA adjustable 12" to 15" TOR. Supports provided on 10' centers and should be lagged to
floor
.
BEARINGS: Removable type, heavy
duty ball bearings, zinc-plated, grease packed, labyrinth seal.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CAPACITY: 300 lbs./ft. up to a
maximum of 1200 lb. pallet load.
ELECTRICAL CONTROLS:
Optional |
