TRANSFER ARM: 10 ga. formed
channel.
TRANSFER BELT: 3/8"
dia. round polyurethane belt.
LENGTHS: Transfer designed to mount in 796LS line shaft conveyors 15"-39" BF.
BELT CENTERS: 12"
ONE DIRECTION FLOW: Transfers
product in one direction.
TAKE-UP: Adjustable sheaves provides
take-up of transfer belt.
BEARINGS: Heavy duty, lubricated, ball bearing units with cast iron housings.
BELT SPEED: Driven at 150% of speed as powered section transfer is mounted in.
|
|
LIFT: 3/4" positive lift.
MOTOR DRIVE: Optional.
CAPACITY: 100 lbs.
AIR CONTROLS: Air cylinder with single solenoid valve.
FLOOR SUPPORTS: Transfer is designed to attach to 796LS/738LS conveyors w/ mounting hardware integral feature of transfer.
NOTE: Specify twist (clockwise or
counter clockwise) for drive bands on line shaft conveyor (model LS or LSA)
that transfer mounts in. Consult factory. |
