BELTING: Series 900 flat top gray
polypropylene belt with 2" high streamline flights on 11.9" centers, FDA approved belting.
DRIVE SPROCKETS: 4.1" pitch dia. with 1.5" square bore.
TAIL SPROCKETS: 4.1" pitch dia. with 1.5" square bore.
END DRIVE: Allows one-direction (unit)
operation.
TAKE-UP: Catenary type, underneath
mounted.
BEARINGS: Drive shaft bearings are
precision, heavy duty, lubricated, ball bearing units with cast iron housings.
|
|
BELT SPEED: 35 FPM, constant.
BED: 8" deep x 10
ga. enclosed box type construction with UHMW wearstrips mounted to 14 ga. steel belt return pan.
INCLINE: 30, 36 and 45° (specify).
PORTABLE SUPPORT: Adjustable floor
supports with 4" dia. casters & bracing.
ROLLER CHAIN: No. 50 chain provided at drive shaft. Chain take-up provided on motor base.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
ELECTRICAL CONTROLS: Optional.
|
