About Us | Contact Us | Home Page
Home Page Site Map
Site Map for Engineered Conveyor & Packaging Systems from Ensalco
24 Hour Shipment
YOU ARE HERE: Conveyors | Misc. Power Conveyors

PC-F
Parts Conveyor With Feeder

OPTIONAL UHMW CLEATS & BEIGE PAINT

Download Hi-Res Tech Drawings (pdf format)

Download catalog page in pdf format

SPECIFICATIONS
BELTING: 3-ply black nitrile belt or 1/2" x 1" flat wire mesh belt with 1-1/2" high galvanized cleats on 12" centers.

DRIVE PULLEY: 4" dia., with 1-3/16" 
dia. shaft, fully lagged with nitrile belt;
4" dia. sprockets supplied with flat wire
mesh belt.

TAIL PULLEY: 4" dia. with 1-3/16"
dia. shaft.

TAKE-UP: Screw type unit at tail pulley provides 12" belt take-up.

BED: 8" deep x 12 ga. enclosed box
type construction with 14 ga. steel belt 
return pan.

BEARINGS: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.
BELT SPEED: 35 FPM, constant.

MINIMUM PARTS SIZE: 1/2" cube for nitrile belt, 1" cube for flat wire mesh belt.

INCLINE: 30, 36 and 45 (specify). 

PORTABLE SUPPORT: Adjustable floor support with 4" dia. casters and bracing.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

CAPACITY: 350 lbs. total distributed load.

ROLLER CHAIN: No. 50 chain provided at drive pulley. Chain take-up provided on motor base.

ELECTRICAL CONTROLS: Optional.

  • 3 WEEK SHIPMENT
NOTE:  "A" or "B" dimensions not to exceed 10'. Combined lengths of "A" and "B" not to exceed 15'. Cleat centers must not exceed 12". Cleats available in rigid construction ONLY. Consult factory for optional cleats.
Minimum parts size of 1/2" cube for neoprene belt, 1" cube for flat wire mesh belt.
QUICK QUOTE
PRODUCT GLOSSARY
VIDEO GALLERY
2013 CONVEYOR CATALOG
COMPONENT PARTS TO FIT OTHER CONVEYORS
TECHNICAL INFORMATION

ROLLERS, BEARINGS, PULLEYS & WHEELS
BALL TRANSFERS
ACCESSORIES
MATERIAL HANDLING
MISC EQUIPMENT
PALLETIZERS
PALLET TRANSFER