|BELTING: Series 1200 flat top gray
DRIVE SPROCKETS: 10.2" pitch dia. with 2.5" square bore.
TAIL SPROCKETS: 10.2" pitch dia. with 2.5" square bore.
END DRIVE: Allows one-direction (unit)
BED: 7" x 1-1/2" x 7 ga. channel frame with open style bed construction and UHMW wearstrips mounted to
TAKE-UP: Catenary type located at
RETURN ROLLERS: 1.9" dia. x 16 ga. steel, model 196S, adjustable with rubber sleeves.
||BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball
bearing units with cast iron housings.
FLOOR SUPPORTS: SH-6 supports
provided on 5' centers and should be lagged to floor.
BELT SPEED: 35 FPM, constant.
MOTOR DRIVE: 1/3 HP, 230/460/3,
60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven
by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS: Optional.