|FRAME: 7 ga. formed boxed channel.
CARRIER CHAIN: No. 80 (model CD280) or no. 60 (model CD260) riveted roller chain.
WEAR STRIP: UHMW long lasting wear strip, upper and lower.
CHAIN CENTERS: 18"
CHAIN TAKE-UP: Screw type located at tail end.
END DRIVE: Allows one-direction (unit) operation; add optional center drive for reversible application.
CHAIN SPEED: 35 FPM constant.
||BEARINGS: Heavy duty, lubricated, ball bearing unit with cast iron housings.
CAPACITY: Unit load not to exceed
FLOOR SUPPORTS: SH supports with adjustment of 23" to 26" top of chain located on 5' centers. Supports should be lagged to floor.
MOTOR DRIVE: 1/2 HP, 230/460/3,
60 cycle, ODP right angle gear motor.
ELECTRICAL CONTROLS: Optional.