BALL TRANSFERS

YOU ARE HERE: Conveyors | Ball Transfer Table

Model B
Ball Transfer Units
		For replacement ball assemblies, refer to part #BRW04650
	Download Hi-Res Tech Drawings (pdf format) Download catalog page in pdf format

SPECIFICATIONS
BALL ASSEMBLIES: 1" dia. steel ball x 1-13/16" overall housing diameter. Mounting bolt is 1/4"-20. BALL CAPACITY: 50 lbs. per ball with max. unit load not to exceed the capacity of 4 balls (200#). FRAMES: 3-1/2" x 1-1/2" x 10 ga. steel with balls in set high position (1/4" above side frames) only.		FRAME CAPACITY: 1300 lbs. maximum distributed live load per 10' section with supports at 10' ctrs; 3200 lbs. at 5' ctrs. PLATES: Balls are attached in square pattern to 10 ga. formed plates up to 39" BF. Above 39", plates are 7 ga. COUPLINGS: Butt type.

Include All 1-Foot Increments
1'- 0" TO 10'- 0"
On Ball Transfers

To prevent pinch points that exist when gravity conveyors are permanently attached to power conveyors, use connector brackets with safety pop-out rollers.