TREAD ROLLERS: 1.9" dia. x 16
ga. steel, model 196S grooved.
DRIVE BELT: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.
DRIVE SHAFT: 1" dia. C1018 cold rolled steel shaft.
COUPLINGS: Couplings located both ends or one end only. Specify where couplings required.
BEARINGS: Precision, lubricated, ball bearing units with composite housings.
SPEED: 60 FPM constant.
BED: 7" x 1-1/2" x 12 ga. formed steel channel frame.
|
|
FLOOR SUPPORTS: SM-6 adjustable
31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CROSS OVER DIRECTION: Specify "cross over to right hand" or "cross over to left hand".
ELECTRICAL CONTROLS: Optional. |
