About Us | Contact Us | Home Page
Home Page Site Map
Site Map for Engineered Conveyor & Packaging Systems from Ensalco
24 Hour Shipment
YOU ARE HERE: Conveyors | Line Shaft Conveyors

SPECIFICATIONS
TREAD ROLLERS: 1.9" dia. x 16 ga. steel, model 196S grooved, 3" centers.

DRIVE BELT: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.

DRIVE SHAFT: 1" dia. C1018 cold rolled steel shaft. NOTE: Spools in spur section only are keyed to provide positive drive (designed not to slip on drive shaft).

COUPLINGS: Couplings located both ends or one end only. Specify where couplings required.

BED: 7" x 1-1/2" x 12 ga. formed steel channel frame. Short side of spur is always 12" overall length.
BEARINGS: Precision, lubricated, ball bearing units with composite housings.

FLOOR SUPPORTS: SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.

MOTOR DRIVE: Unit is designed to be driven by 796LS.

ROLLER CHAIN: Spur driven via crossover with No. 40 chain.
  • 4 WEEK SHIPMENT
NOTE: Specify "right hand" or "left hand". 
To determine hand of spur, refer to technical section.
QUICK QUOTE
PRODUCT GLOSSARY
VIDEO GALLERY
2013 CONVEYOR CATALOG
COMPONENT PARTS TO FIT OTHER CONVEYORS
TECHNICAL INFORMATION

ROLLERS, BEARINGS, PULLEYS & WHEELS
BALL TRANSFERS
ACCESSORIES
MATERIAL HANDLING
MISC EQUIPMENT
PALLETIZERS
PALLET TRANSFER