TREAD ROLLERS: 1.9" dia. x 16 ga. steel, model 196S grooved.
DRIVE BELT: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.
DRIVE SHAFT: 1" dia. C1018 cold rolled steel shaft.
COUPLINGS: Couplings located
on horizontal section only.
LIFT: Gas cylinder provides assist for raising/lowering.
BEARINGS: Precision, lubricated, ball bearing units with composite housings.
|
|
BED: 4-1/2" x 1-1/2" x 10
ga. formed steel channel frame on actual lift gate; 7" x 1-1/2" x 12 ga. on 2' horizontal section.
FLOOR SUPPORTS: SM-6 adjustable
31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.
MOTOR DRIVE: Unit is designed to be driven by 796LS.
SPECIFY HAND: Specify if gate is left hand or right hand. |
