About Us | Contact Us | Home Page
Home Page Site Map
Site Map for Engineered Conveyor & Packaging Systems from Ensalco
24 Hour Shipment
YOU ARE HERE: Conveyors | Line Shaft Conveyors

SPECIFICATIONS
TREAD ROLLERS: 1.9" dia. x 16 ga. steel, model 196S grooved.

DRIVE BELT: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.

DRIVE SHAFT: 1" dia. C1018 cold rolled steel shaft.

COUPLINGS: Couplings located both ends (type "A"), one end only (type "B" or "C") or none (type "D"). See 'line shaft coupling chart' and specify.

CENTER DRIVE: Reversible drive; located approximately 18" from end of bed section for 3" and 6" RC; 16-1/2" for 4" RC.

BEARINGS: Precision, lubricated, ball bearing units with composite housings.

SPEED: 60 FPM, constant.
BED: 7" x 1-1/2" x 12 ga. formed steel channel frame. Bed sections attached with splice plates and floor supports.

FLOOR SUPPORTS: SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive shaft is driven by No. 50 chain. Chain take-up provided on motor base.

CAPACITY: See technical section for load capacity rating.

ELECTRICAL CONTROLS: Optional.

Include All 1-Foot Increments 
2'- 0" TO 100'- 0"
QUICK QUOTE
PRODUCT GLOSSARY
VIDEO GALLERY
2013 CONVEYOR CATALOG
COMPONENT PARTS TO FIT OTHER CONVEYORS
TECHNICAL INFORMATION

ROLLERS, BEARINGS, PULLEYS & WHEELS
BALL TRANSFERS
ACCESSORIES
MATERIAL HANDLING
MISC EQUIPMENT
PALLETIZERS
PALLET TRANSFER