TREAD ROLLERS: 1.9" dia. to 1-3/8" dia. x 16 ga. tapered steel, model 138Tw/ 5/16" hex, grooved.
DRIVE BELT: 3/16" dia., polyurethane belts. Nominal 7.5 lbs. per roller drive.
DRIVE SHAFT: 1" dia. C1018 cold rolled steel shaft, located on inside radius. NOTE: Spools are keyed to provide
positive drive (designed not to slip on drive shaft).
COUPLINGS: Couplings located both ends (type "A") or one end only (type "B" or "C"). See
'line shaft curve
couplings' and specify.
BEARINGS:
Precision, lubricated, ball
bearing units with composite housings.
6 bearings per 90° and 60° curve; 4 per 45° and 30°.
|
|
UNIVERSAL JOINTS: 4 per 90° and 60° curve; 2 per 45° and 30° curve.
BED:
7" x 1-1/2" x 12 ga. formed steel channel frame.
TANGENTS: 1'-0" both ends on 60°
and 90°; 1'-6" both ends on 30° and 45°. 1'-0" infeed, 1'-0" discharge and no center tangent on 180°. Tangent roller centers 3" RC.
FLOOR SUPPORTS: SM-6 adjustable
31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.
MOTOR DRIVE: Unit is designed to be
driven by 738LS.
ELECTRICAL CONTROLS: Optional. |
