TREAD ROLLERS: 3-1/2" dia. x .300 wall steel, model 3530S with sprockets.
CHAIN GUARD:
The chain drive is completely enclosed along the entire length of the conveyor.
CENTER
DRIVE: Reversible drive either side mounted or underneath mounted (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
BEARINGS: Removable type, heavy duty ball bearings, zinc plated, grease packed, labyrinth sealed.
BED LENGTHS (6" RC, #60 CHAIN AND
12" RC, #80 CHAIN): Intermediate bed section lengths 3'-0", 4'-0", 5'-0", 6'-0", 7'-0", 8'-0", 9'-0" and 10'-0" increments. Minimum overall conveyor length with
drive 5'-0". Maximum overall conveyor length 80'-0".
BED LENGTHS (7-1/2" RC, #80 CHAIN): Intermediate bed section lengths 3'-1-1/2", 3'-9", 4'-4-1/2", 5'-0", 5'-7-1/2", 6'-3", 6'-10-1/2", 7'-6", 8'-1-1/2", 8'-9",
9'-4-1/2" and 10'-0". Minimum overall conveyor length with drive 5'-0".
Maximum overall conveyor length 80'-0".
|
|
ROLLER CENTERS: 6" with No. 60 chain; 7-1/2" and 12" with No. 80 chain.
CHAIN DRIVE: Roller to roller with No. 60 or No. 80 roller chain.
SPEED: 35 FPM constant.
BED: 6" at 8.2 lbs. and 8" at 11.5 lbs.
structural steel frame. Bed sections attached with couplings and floor supports.
MOTOR
DRIVE: 3/4 HP, 230/460/3,
60 cycle, ODP right angle gear motor.
ROLLER
CAPACITY: 2500 lbs. per roller.
FLOOR
SUPPORTS: Model SS3530-3
structural supports adjustable 19-1/4" to 24-1/2" TOR. Supports provided on 5' centers and should be lagged to floor.
ELECTRICAL
CONTROLS: Optional. |
