About Us | Contact Us | Home Page
Home Page Site Map
Site Map for Engineered Conveyor & Packaging Systems from Ensalco
24 Hour Shipment
YOU ARE HERE: Conveyors | Misc. Power Conveyors

SPECIFICATIONS
BELTING: 1/2" x 1" x 11 ga. clinched edge, galvanized wire mesh belt.

DRIVE SPROCKETS: 4" dia. sprocket with 
1-3/16" dia. shaft or 8" dia. sprocket with 
1-7/16" dia. shaft. 

TAIL SPROCKETS: 4" dia. sprocket with 
1-3/16" dia. shaft.

END DRIVE: One-direction unit operation.

TAKE-UP: Screw type unit at tail end provides 12" belt take-up.

RETURN ROLLERS: 1.9" dia. x 16ga. steel, model 196S, adjustable. 

BED: 3-1/2" x 1-1/2" x 10 ga. formed channel frame with UHMW wear strips. 
FLOOR SUPPORTS: SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4" TOB. Supports provided at both ends and each bed joint and should be lagged to floor.

BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

BELT SPEED: 60 FPM, constant.

MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

ROLLER CHAIN: Drive shaft is driven by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

  • 4 WEEK SHIPMENT

To prevent pinch points that exist when belt conveyors are permanently attached to other conveyors, use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).
QUICK QUOTE
PRODUCT GLOSSARY
VIDEO GALLERY
2013 CONVEYOR CATALOG
COMPONENT PARTS TO FIT OTHER CONVEYORS
TECHNICAL INFORMATION

ROLLERS, BEARINGS, PULLEYS & WHEELS
BALL TRANSFERS
ACCESSORIES
MATERIAL HANDLING
MISC EQUIPMENT
PALLETIZERS
PALLET TRANSFER