BELTING: 1/2" x 1" x 11 ga. clinched edge, galvanized wire mesh belt.
DRIVE SPROCKETS: 4" dia. with 1-3/16" dia. shaft; 8" dia. with 1-7/16" dia. shaft.
TAIL SPROCKETS: 4" dia. sprocket with
1-3/16" dia. shaft.
END DRIVE: One-direction unit operation.
TAKE-UP: Screw type unit at tail end
provides 12" belt take-up.
BED: 3-1/2" x 1-1/2" x 10 ga. open type
formed channel frame w/ UHMW wear strips.
RETURN ROLLERS: 1.9" dia. x 16ga. steel, model 196S, adjustable.
|
|
FLOOR SUPPORTS: SM-6 with 4"
dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable
33-3/4" to 40-1/4" TOB. Supports provided at both ends and each bed joint and should be lagged to floor.
BELT SPEED: 60 FPM, constant.
BEARINGS: Drive and tail shaft bearings are precision, heavy duty, lubricated, ball
bearing units with cast iron housings.
MOTOR DRIVE: 1/3 HP, 230/460/3,
60 cycle, ODP right angle gear motor.
ROLLER CHAIN: Drive shaft is driven
by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up
provided on motor base.
|
