|TREAD ROLLERS: 2-1/2" dia. to 1-11/16"
dia. x 14 ga. steel tapered rollers, model 254T with sprockets.
CHAIN DRIVE: Roller to roller with No. 60 circular roller chain.
END DRIVE: Reversible drive, side
mounted or underside (specify). Main drive roller is supported by precision, heavy duty,
lubricated, ball bearing units.
ROLLER CENTERS: 6" RC measured at
outside radius of curve.
CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor.
BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed.
||MOTOR DRIVE: 3/4 HP, 230/460/3,
60 cycle, ODP right angle gear motor.
BED: 6" x 1-1/2" x 10
ga. and 4" x 1-1/2" x 10 ga. formed steel channel frame.
SPEED: 45 FPM, constant.
FLOOR SUPPORTS: SM-6 adjustable
28-1/2" to 40-1/2" TOR. Supports should be lagged to floor.
DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with
reference point located at outside of curve).
ELECTRICAL CONTROLS: Optional.