TREAD ROLLERS:
2-1/2" dia. x 11 ga. steel, model 251S.
CHAIN DRIVE:
Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60 roller chain.
CENTER DRIVE:
Drive either side mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS:
4" or 6" ONLY.
BED:
7" x 1-1/2" x 7 ga. and 5" x 1-1/2" x 7 ga. formed steel channel frame. Bed sections bolted together with butt couplings and floor supports.
CHAIN GUARD:
Chains are completely enclosed along entire length of conveyor.
BEARINGS:
Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.
|
|
ACCUMULATION ZONE:
5'-0" zone lengths, mechanically actuated, zone singulation operation.
For photo sensor controlled zones, see model SZ251CDA Smart zoneŽ.
MINIMUM LOAD: Minimum load
weight required to activate sensor roller mechanism is 50 lbs.
SPEED: 35 FPM, constant.
FLOOR SUPPORTS: For underside drive, SH-4CDA adjustable 19" to 22" TOR; for side mounted drive, SH-2CDA adjustable 13" to 16" TOR. Supports provided on 5' centers and should be lagged to floor.
MOTOR DRIVE: 3/4 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CAPACITY: 1000 lbs./ft. up to a
maximum of 4000 lb. pallet.
ELECTRICAL CONTROLS:
Optional |
