ROLLERS: 1.9" x 9 ga. steel tubing, model 199S, with straight ends reamed
to provide smooth bearing seats.
FRAMES: Formed steel painted channel
3-1/2" x 1-1/2" x 10 ga. set high;
4-1/2" x 1-1/2" x 10 ga. set low.
ROLLER CAPACITY: 260 lbs. per roller.
BEARINGS: Integral plain ball bearings,
zinc plated, grease packed. |
|
FRAME CAPACITY: 1300 lbs. max. distributed live load per 10' section with supports at 10' centers; 3200 lbs. at 5'
ctrs.
COUPLINGS: Butt type.
AXLES: 7/16" hex shaft, spring loaded.
OPTIONAL FRAME: 4" @ 5.4 lbs.
struc. steel channel frame, rollers 3/16" high, may vary due to structural tolerances.
|
