ROLLERS: 1.9" x 16 ga. steel tubing, model 196S, with smooth swaged
ends.
FRAMES: Formed steel painted channel
3-1/2" x 1-1/2" x 10 ga. set high;
4-1/2" x 1-1/2" x 10 ga. set low.
BEARINGS: Integral plain ball bearings, zinc plated, grease packed.
FRAME CAPACITY: 250 lbs. per roller,
or 1300 lbs. maximum distributed live load per 10' section with supports at 10'
centers; 3200 lbs. at 5' centers. |
|
COUPLINGS: Butt type.
AXLES: 7/16" hex shaft, spring loaded.
OPTIONAL FRAME: 4" @ 5.4 lbs.
struc. steel channel frame, rollers 3/16" high, may vary due to structural tolerances.
|
