|TREAD ROLLERS: 1.9" dia. x 12 ga. steel, model 192S with sprockets.*
CHAIN DRIVE: Roller to roller with No. 40 circular roller chain.
END DRIVE: Reversible drive either side mounted or underside (specify). Main drive roller is supported by precision, heavy duty, lubricated, ball bearing units.
CHAIN GUARD: Chain drive is enclosed, top and bottom, along entire length of conveyor.
BED: 5-1/2" x 1-1/2" x 10 ga. and
3-1/2" x 1-1/2" x 10 ga. formed steel channel frame.
BEARINGS: Removable type, heavy duty bearings, zinc plated, grease packed, labyrinth sealed.
||FLOOR SUPPORTS: SM-6 adj. 28" to 40" TOR and should be lagged to floor.
MOTOR DRIVE: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
SPEED: 45 FPM, constant.
DRIVE LOCATION: Drive located on outside of curve. Specify right hand drive or left hand drive (drive hand determined with
reference point located at outside of curve).
ROLLER CENTERS: 5" RC measured at
outside radius of curve.
ELECTRICAL CONTROLS: Optional.