TREAD ROLLERS: 1.9" dia. x 12 ga., model 192S.
CHAIN DRIVE: Roller-to-roller No. 40 roller chain. Zone-to-zone No. 60
roller chain.
CHAIN GUARD: All chains are
completely enclosed along the entire length of conveyor.
CENTER DRIVE: Drive either side
mounted or underside mounted (specify). Drive shafts are supported by precision, heavy duty, lubricated, ball bearing units.
ROLLER CENTERS: 4" or 6" RC ONLY.
SPEED: 35 FPM, constant.
ACCUMULATION ZONE: 5'-0" zone lengths, mechanically actuated, zone
singulation operation. For photo sensor controlled zones, see pages 58-59 for model SZ192CDA Smart zoneŽ.
MINIMUM LOAD:
Minimum load weight required to activate sensor roller mechanism is 50 lbs.
|
|
BED:
6-1/2" x 1-1/2" x 10 ga. and 4-1/2" x 1-1/2" x 10 ga. formed steel channel frame. Bed sections are bolted together with butt couplings and floor supports.
FLOOR SUPPORTS:
For underside drive, SM-3CDA adjustable 18" to 21" TOR; for side mounted drive, SM-1CDA adjustable 12" to 15" TOR. Supports provided on 10' centers and should be lagged to floor.
BEARINGS:
Removable type, heavy duty ball bearings, zinc-plated, grease packed, labyrinth seal.
MOTOR DRIVE:
1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.
CAPACITY:
300 lbs./ft. up to a maximum of 1200 lb. pallet load. Minimum unit load 50 lbs.
ELECTRICAL CONTROLS:
Optional |
